Watchguard XTM 1050, XTM 2050, XTM 2 Series, XTM 3 Series, XTM 5 Series, XTM 8 Series – Fireware XTM OS 11.6.1 – CSP3 Build # 354688
11.6.1 – CSP3 Build # 354688 Resolves the following issues:
- BUG69616: The dynamic IP at peer side is not added into the local cache file at multi-wan
- BUG69351: After reboot multiple Phase 1 one time outs occurred. Unable to build VPN tunnels
- BUG69624: Limit rate of phase one auto start after reboot
- BUG69377 Incorrect model number displayed with MODEL 505 license
- BUG69625: iked crash sig 6, sig 11
- BUG68554: Interface failing to route and not listing ‘inet addr’ in status report > interfaces
- BUG68312: SIP proxy causes CFM restart due to memory cap violation
- BUG67656: Process `cfm.5′ with pid: 1515 / tid: 1515 died unexpectedly on signal 6 (SIP)
- BUG67479: CFM Stack traces using SIP after upgrading from 11.4.2 to 11.5.3U1 using existing setup
- BUG67782: cfm.2 stacktrace, SIP (stack contents @ 0xbe836430), signal 6
- BUG67001: BOVPN over 1:1 NAT fails with multiWAN causes one way traffic (inbound fails)
- BUG68944: VPN 1:1 nat does not work when we use it on multiwan(3 pppoe and 1 dhcp)xtm box
- BUG69090: VPN tunnel fails and stops passing traffic – xfrm_dst_cache value exceeded in slab info
- BUG67819: memory leak causing xfrm_dst_cache value to increase and causing appliance to lockup
- BUG67921: Negotiated BOVPN tunnels stopp passing traffic – Appliance has valid SA info
- BUG69351: After reboot multiple Phase 1 one time outs occurred. Unable to build VPN tunnels XTM2050
You can request 11.6.1 – CSP3 Build # 354688 from Watchguard Support by logging a support case online, they should then be able to provide an ftp download link and appropriate credentials.
Please note that Watchguard CSP releases are cumulative so you should only need to apply the latest to ensure that you also have any previous fixes.